with the raised profile pointing outwards and fixed with the two screws.
4.
Before fully tightening the 2 screws, adjust the taper lever to the lower position
and align the blades so that their cutting edges are parallel to one another.
Tighten the 2 screws. Note that if the blades are not correctly aligned then
cutting efficiency will be impaired.
STORAGE
When not in use, unplug the hair clipper and store it out of reach of children in a safe dry
place. Never wrap the cord around the hair clipper as this will cause the cord to wear
prematurely and break. Handle the cord carefully for long life and avoid jerking, twisting
or straining especially at the plug connections.
TROUBLESHOOTING
THE HAIR CLIPPER DOES NOT WORK WHEN TURNED ON
Hair clipper must be charged for a full 16 hours, or use hair clipper while plugged into
wall.
HAIR CLIPPER CUTTERS DO NOT MOVE
The cutting unit may be dirty and clogged. Clean the unit as directed in Cleaning &
Maintaining section.
HAIR CLIPPER DOES NOT HOLD CHARGE
Fully discharge battery by running hair clipper until it stops; then follow recharging
instructions (see section on Charging Your Hair Clipper).
This product is not suitable to use in a bath or shower.
This product conforms to radio frequency interference requirements.
Any product purchased and used commercially carries a limited 90 Day Warranty.
8
