22
Maintaining
Post-use maintenance
After each use:
Clean each RV’s external rubber surfaces with a clean cloth.
Clean each RV’s lens and illumination window with a lens cleaning cloth.
Make sure each RV’s base screws are tight.
Charge the PDU and both RVs.
Scheduled charging
IMPORTANT:
Fully charge the PDU and both RVs every
three months. If this regular charging isn’t performed, the
units may be permanently damaged.
Internal inspection and cleaning
The Remote Viewer should be inspected and cleaned at the following times:
If the RV does not rotate, or rotates sluggishly, when directed by the PDU.
If the RV was exposed to mud, water, sand or heavy dust.
As part of annual preventive maintenance.
1. Using a Philips screwdriver, remove three screws securing the RV’s base.
2. Remove the base.
3. Clean accumulated dust, sand and dirt from the lower surface.
IMPORTANT:
The RV is fully sealed. Do not lubricate!
4. Replace the base, then secure it using the three screws removed in step 1.
Note:
For all other maintenance operations, return the
system to Remington Technologies Division for service.
Maintenance records
Use the table on the next page to record maintenance activities.
