12
6. Select one RV: press the
Standby
button
once, quickly (each press toggles
between the RVs).
If you don’t see video from the RV, verify that the RV and PDU are charged.
If there is video interference:
Reorient the video/audio antenna (on the right side of the PDU).
Press the
Channel
button
on the PDU. (Each RV can operate on one of
four radio channels.)
7. Verify RV movement:
a. Nudge the RV by about 10º: momentarily press one
Direction
button.
b. Repeat step a for the other direction.
c. Nudge the RV by about 30º: press one
Direction
button for about 2 seconds.
d. Repeat step c for the other direction.
8. Verify RV rotation:
a. Initiate continuous rotation: press the
Rotation On/Off
button
.
The RV should rotate in the direction it was last nudged.
b. Stop continuous rotation: press the
Rotation On/Off
button
, or
press either
Direction
button.
9. Verify illumination operation:
a. Place the RV in a dark area.
b. Press the
Illumination
button
on the PDU to turn the Illumination LEDs on
(as indicated above the button). You should see the scene clearly on the PDU.
c. Press and hold the
Illumination
button (about 2 seconds) to select Auto
Illumination Mode (as indicated above the button). You should see the scene
clearly on the PDU.
Using
continued
