![background image](http://html1.mh-extra.com/html/remington/amana-ptc/amana-ptc_architects-and-engineers-manual_1437051016.webp)
Page 14
Wall Sleeve Installation
Figures 6 and 7 show installations for thin and panel wall
construction. For all wall constructions, the center of gravity
(10
1
/
4
" from the outside edge of the wall sleeve) must be
within the load bearing surface of the wall or other support
must be employed. Support can be provided by floor mount-
ing (with 208V/230V) units, a factory-supplied subbase or
from other field-supplied materials. Louver frames (figure 8)
are recommended for thin wall and panel wall applications
for positive anchoring to the wall. For thicker walls, wall
sleeve extensions are available from your local Remington
®
representative. Air splitters must be included in wall sleeve
extensions.
* A wall sleeve should always extend
1
/
4
" minimum past finished
outside wall and have
1
/
4
" of a bubble pitch to the outside.
Figure 6. Thin wall construction with standard
electrical subbase
Figure 8. Louver frame
Table 1. Maximum wall thickness without
sleeve extensions
Figure 7. Thin wall construction without subbase
(208/230V only)
Stamped
3
/
8
"
14
1
/
8
"
9
3
/
4
"
Architectural 1
1
/
8
"
14
7
/
8
"
10
1
/
2
"
Louver
Type
No
Subbase
Standard
Subbase
Maximum Wall Thickness
Содержание Amana PTC
Страница 1: ...Packaged Terminal Air Conditioners and Heat Pumps Architects and Engineers Manual...
Страница 15: ...Page 13 Wiring Diagrams Model PTAC 07B 09B 12B 15B...
Страница 20: ......