Remii WM-45-XS, Инструкция по установке и эксплуатации

Страница: 17 / 23

17
10. Press “LOW” when the heater is on,
display..
11. Press “HIGH” when the heater is on
display.
12. Press “TEMP” when the heater is on
C-16-19-21-23-25-27-30;
and Fahrenheit, H0-61-66
the heater is on, one setting of heater works
the heater is on, two settings of heater work
hen the heater is on to set the room temperature,
30; Press this button for 5 seconds to switch between Celsius
66-70-73-77-80-86.
works, indicating “H1”on
of heater work, indicating “H2” on
to set the room temperature,
5 seconds to switch between Celsius
NOTE: In “TEMP” mode, two settings of heater work. When the “HEATER ON/OFF” button is
locked, “HIGH”, “LOW”,”TEMP” can’t use.
7. Press “ADJUST”, rotates through
8. Press “FLASH”, the tray light cycles through all 13 colors.
9. Press “HEATER ON/OFF
“H2” on display; press again to turn off the heater.
indicating “LO”, heater is off and the
seconds, indicating “UL
unlocked. If the heater is
“H1”,”H2” or “TEMP” to indicate
, rotates through the 13 colors of tray lighting.
the tray light cycles through all 13 colors.
ON/OFF” once to turn on the heater, in H2 setting, 1500W, indicating
display; press again to turn off the heater. Press this button for
heater is off and the button is locked. Press this button again for
UL” on display, heater is still not working but the button is
unlocked. If the heater is on but the flame and tray light are off,
to indicate the heater’s working mode.
heater, in H2 setting, 1500W, indicating
Press this button for 5 seconds,
button is locked. Press this button again for 5
, heater is still not working but the button is
but the flame and tray light are off, there is display of