REMEZair MultiClick Pro, Руководство пользователя

Страница: 10 / 17

ENG
1. The battery of the cordless vacuum cleaner can be charged in two ways:
• During charging, install the vacuum cleaner correctly in the hanger
and connect the power adapter to the battery.
• The battery can be removed from the device and charged via the AC adapter
at any convenient location.
2. The plug of the power adapter is inserted into the corresponding hole in the battery.
3. The battery charging time is 4-5 hours. When charging is in progress, the battery
indicator flashes. After the battery is fully charged, the indicator lights up continuously
without blinking.
Note:
Use the supplied adapter to charge the battery.
Please charge the battery fully before using it for the first time.
You cannot use the vacuum cleaner while charging.
Warning! Do not leave the battery unattended while charging; after the battery is fully
charged, disconnect it from the charger.
When charging the battery separately, the numbers 1, 2, 3 located on the display flash.
• Brush nozzle
• Crevice nozzle
• Mini power brush for furniture
1. Select the desired hard-to-reach
attachment and attach it directly to the
suction port of the dust container.
2. To increase the cleaning space, if
necessary, fix the desired accessory to the
metal bar.
Using attachments for hard-to-reach places
After each cleaning, clean the tank of dirt and
dust.
Press the upper end of the catch at the
bottom of the dust tank, and the bottom of
the dust tank will automatically open.
Collected dirt should not exceed the MAX
mark.
After using the vacuum cleaner, it is
recommended to clean the dust tank and
clean the brush if it gets clogged. A full dust
tank will significantly reduce the efficiency
of the vacuum cleaner.
1. Disconnect the dust container from
the case of the vacuum cleaner, then
sequentially remove all filtration elements
from it HEPA filter, cyclonic filter, main
filter.
2. Rinse filtration elements from it HEPA
filter, cyclonic filter and main filter
under running water and dry at room
temperature. Use the optional HEPA filter
included in the kit. You can purchase an
additional filter if necessary.
3. Place the filtration system elements back
into the dust tank. When installing the
pre-filter, align the grooves of the body
and the filter. Install the HEPA-filter on
the cyclonic filter.
4. Secure the container to the instrument
case by turning it clockwise as indicated
on the container.
1. Remove the roller brush retainer from the
underside of the motorized accessory,
then remove the roller brush.
2. Remove hair and other debris from the
roller brush and clean the brush inlet.
3. Place the clean brush back into the
motorized accessory and reinstall the
retaining parts.
Easy cleaning of the dust tank
Cleaning the vacuum cleaner
Cleaning the motorized floor brush
Power
adapter
Host battery pack
charging socket
The first way The second way
Removing the
removable
battery
Power
adapter
Host battery
pack charging
socket
1. Fasten the bracket to the wall using the
supplied screws and dowels.
2. Fix the vacuum cleaner head in the
hanger.
3. If necessary, fix the attachments to the
hanger.
Affixing the device
НEPA-filter
Cyclonic filter
Main filter
Dust release
button