REMEHA Quinta Ace SCB-01, Инструкция по установке и эксплуатации

Страница: 21 / 36

5.7 Connected control PCBs
1. Navigate to the control PCB menu.
2. Press the
key to open the menu.
3. To see which control PCBs are connected, press the key.
4. Press the
h
key twice to go back to the main display.
5.8 Activating the manual mode menu
In some cases, it may be necessary to set the device to manual mode, for
example when the controller has not yet been connected.
1. Navigate to the manual mode menu.
2. Press the
key to open the menu.
3. Press the or keys to modify the required flow temperature in
manual mode.
4. Press the key to confirm the value.
Manual mode is switched on.
5. Press the
h
key twice to go back to the main display.
Manual mode is switched off.
5.9 Shutdown
5.9.1 Switching off the central heating
1. Press the key for about 2 seconds.
2. Press the key to confirm the selection for the central heating.
Fig.102 Step 2
MW-3000339-01
Fig.103 Step 3
MW-3000340-01
Fig.104 Step 4
MW-3000341-01
Fig.105 Step 2
MW-3000302-01
Fig.106 Step 3
MW-3000303-01
Fig.107 Step 4
MW-3000304-01
Fig.108 Step 5
MW-3000305-01
Fig.109 Step 1
MW-3000328-01
Fig.110 Step 2
MW-3000329-01
5 Installer instructions
7698983 - v.02 - 17102018 21