REMEHA Quinta Ace SCB-01, Инструкция по установке и эксплуатации

Страница: 16 / 36

5 Installer instructions
5.1 Changing installer parameters
The parameters in the Installer Menu must only be changed by a qualified
professional. Code
must be entered in order to change the
parameters.
Important
First, select a device, control PCB or zone to view or amend a
setting.
Caution
Modification of the factory settings may impair operation of the
device, control PCB or zone.
1. Navigate to the Installer menu.
2. Press the
key to open the menu.
3. Keep pressing the key until the code is displayed.
4. Press the key to confirm opening the menu.
5. Keep pressing the key until the required device, control PCB or
zone is displayed.
6. Press the key to confirm the selection.
7. Keep pressing the or key until the required parameter is
displayed.
8. Press the key to confirm the selection.
9. Press the or key to modify the value.
10. Press the key to confirm the value.
Fig.52 Step 2
MW-3000312-01
Fig.53 Step 3
MW-3000313-01
Fig.54 Step 4
MW-3000314-01
Fig.55 Step 5
MW-3000406-02
Fig.56 Step 6
MW-3000407-01
Fig.57 Step 7
MW-3000315-01
Fig.58 Step 8
MW-3000336-01
Fig.59 Step 9
MW-3000337-01
Fig.60 Step 10
MW-3000338-01
5 Installer instructions
16 7698983 - v.02 - 17102018