30
EN
6 Fault messages
A fault message is given by the green status LED. This is indicated by the following
flash patterns:
1. The LED first flashes on for 1 second ( ) and then off for 0.5 seconds ( ).
2. The LED then flashes a number of times as indicated in the table below to signify
the fault.
3. Thereafter, the LED is off for at least 0.5 seconds.
This flash pattern is repeated each time.
6.1 Fault messages green status LED
Fault indication
Green status LED flashes as follows:
Problem
No connection with
iSense RF
.
Solution
- Check whether the
iSense RF
indicates a fault or is on.
- Try to re-establish the connection between the
iSense RF
and
the
Base station;
see Chapter 5.
- If this does not solve the problem, relocate the
iSense RF
or the
Base station
or remove obstacles that can interfere with the RF
signal; see
paragraph 3.1.
T001500-B
T001500-B
T001500-B
