REMdevice BRICK 09, Инструкция по эксплуатации

Страница: 6 / 37

Installation, start up and operating manual –
version 5.3 Gen.10
Radio control BRICK and PAIL
Automatic Switching OFF
If the setting is activated (factory settings) the keypad will automatically
switch itself off after approximately 4 minutes of inactivity. To resume
press the START pushbutton.
Locking and unlocking the PAIL Transmitter
It is possible to lock the use
of the PAIL transmitter model
without a key in the following
manner:
a) start up the transmitter
by turning and
disengaging the STOP
button.
b) press the Joystics 1 and 2
on the arrows direction
and the START button,
then release.
If an attempt is made to activate the transmitter after this operation the
two red and green led lights will flash and the transmitter will emit an
acoustic sound.
To unlock the transmitter repeat the above sequence.
Locking and unlocking the keypad
It is possible to lock the use of the BRICK transmitter
model without a key in the following manner:
c) start up the transmitter by turning and
disengaging the STOP button.
d) press the following pushbuttons at the same
time: 7, 8, 9 and the START button, then
release.
If an attempt is made to activate the transmitter
after this operation the two red and green led lights
will flash and the transmitter will emit an acoustic
sound.
To unlock the BRICK transmitter repeat the above
sequence.
START
STOP
1 2
0/1
STOP
START
7
9
START
8
Figure 2
Figure 3
6
REM
device
®
- ITALY