REMdevice BRICK 09, Инструкция по эксплуатации

Страница: 3 / 37

Installation, start up and operating manual –
version 5.3 Gen.10
Radio control BRICK and PAIL
DESCRIPTION
The equipment consists of transmitter unit that can be BRICK or PAIL,
receiver RxDIN-CL or RxDIN with antenna and contact-less recharge unit.
INSTRUCTIONS FOR THE CORRECT AND
SAFE USE OF THE EQUIPMENT
Operation of this equipment must be undertaken only by qualified persons
who have previously read the Operating Instructions and who are fully
aware of Safety at Work regulations as laid down by law.
Installation of the equipment on the side of the machine to be operated
must be carried out by qualified technical personnel who are well versed in
the technical specifications of the radio control unit and of the machine to
be operated and who are also qualified to carry out installation in the
correct manner according to the guidelines.
The manufacturer of this equipment cannot be held responsible for any
damage to persons or things caused by:
• misuse or improper operation of the equipment
• errors in cabling or wrong electrical connections
• tampering with the equipment
•
modifications made to the radio control unit
•
use of non original replacement parts
• failure to properly maintain equipment
• failure to replace worn, damaged or defective parts
• operating the equipment while bypassing proper safety regulations, or
otherwise altering the original intended function of the equipment
This equipment functions using radio signals. It is able to operate the
machinery to which it is connected even in the presence of objects that
impede visibility from the machinery, for example: walls, metal or wood
panelling, machinery, tools, buildings, vehicles, etc.
Activating the radio control unit
•
Position yourself with the transmitter unit so that you have complete
and totally un-obscured vision of the machine to be operated.
• Never stand under suspended loads.
• Keep proper footing and balance at all times.
• pay attention to the control identification labels next to each pushbutton
or joystick.
•
do not activate any buttons or joysticks if you don’t know exactly what
its function is.
REM
device
®
- ITALY
3