REMA Hoistman HM-15, Руководство пользователя

Страница: 15 / 36

15
CAUTION

Attach a stopper to the ends of the traverse and travel rails.

Make sure that a location on which the chain hoist is installed has a sufficient strength.

Suspend the chain hoist in a manner that it can freely swing about.
WARNING

Do not get on a suspended load.

Do not leave a suspended load unattended.

Do not allow your attention to be diverted from operating the chain hoist.

Do not use the chain hoist for the oblique pulling.
First move the chain hoist to_ right above a load and then lift it.

Do not use the chain hoist for the earth lifting (for example, hooking fixed objects such as houses or structures).

Do not carry out turnover of a suspended load.

Turnover should be done by means of a device specialized in that purpose or only by a skilled
person.

Make sure before operation that the hand chain properly functions. Do not operate the chain hoist when the

hand chain is in disorder.

Make sure before operation that the brake properly functions. Do not operate the chain hoist when the brake is

in disorder.

Do not apply the electric welding on a suspended load.

Do not allow the load chain to be used as a ground(earth) for the welding machine.

Do not allow the load chain to be touched by a live welding electrode.

Do not operate the chain hoist in such a manner that a load and/or its hand chain is suspended from any structure.
CAUTION

Do not use the chain hoist with a damaged safety latch of the hook.

Do not have the chain hoist body or trolley hit against atoppers or other structures.

Do not use the chain hoist with the nameplate and label attached to the body removed or left unclear.

Operate the chain hoist only by means of a manual pulling force(of the operator).

Do not throw away or drag the chain hoist.

Stop Lifting once when the load chain becomes tense to check safety.

In Lifting a load with two chain hoists, select a chain hoist of which rated load exceeds the load to be lifted.

Always keep the hoist body and the load chain clean so that dust, sands and the like will not be deposited on them.

Make sure that the range of lift of the chain hoist is sufficient for the intended work.

Always lubricate the load chain before use.

Pay attention that the load chain should not be over-Iowered.
4. Maintenance, Inspection and Modification
WARNING

Never use parts other than genuine ones made by us.

Never do shortening or lengthening of the load chain.

Do not use load chains made by any other manufacturers than us.
Our load chain is different from other manufactures' chains in terms of strength, hardness, elongation and
dimensions.
You are therefore strictly requested not to apply any other manufacturers' chains to our chain hoist.

Only specialists authorized by the employer may carry out the maintenance, inspection or repair.

Carry out the maintenance, inspection or repair with the chain hoist unloaded(e.g. without loads).

When any disorder is found in the maintenance or inspection, immediately make repair before re-operating the
chain hoist.
REMA®
MANUAL©