RP6500 User’s Manual
Page 22 of 31
2. Press
to enter,
3. Press
/
to select the character you need: e.g.:
Repeater Mode or Talkarnd mode,
4. Press
to confirm.
Instantly select the channel
Shift to the channel you selected instantly, so that you can communicate at the channel you are used to.
It can be set as: short
press
: instantly select channel 1, long
press
：
off.
1. Press the key once to instantaneously select the channel, e.g.
：
CHANN 15
2. Press
again to return.
Call 1, 2, 3, or 4
Press the side button programmed as
Call 1, 2, 3, or 4
to transmit the specified code stored in the contact list.
Release “Call” button, and speak to the microphone to
call with the PTT button still pressed.
It can be set as: short
press
: Call 1, long
press
：
off.
1. Press the key once to make a call (within the current channel), and will quit automatically after the call.
Channel Annunciation
Select or delete the voice annunciation function.
Adjust display contrast
You can adjust the display contrast as per your need.
It can be set as: short
press
: display contrast, long
press
：
off.
1. Press the key once, Contrast will be shown,
2. Press
/
to select the character you need,
3. Press
to confirm.
Manual programming
The dealer can open the manual programming rights of channel frequency set, CTCSS
，
DCS.
Basic operations of programmable keys:
You can set the programmable keys with the “key set” in PC software, as follows:
It can be set as: short
press
: display channel frequency
, chan
nel alias and
channel No.
, long
press
：
off.
1. Press the key once, display the channel alias, e.g.:
CHANNEL 1
