RP6500 User’s Manual
Page 16 of 31
3. Press
to
select
4. Press
, is
shown, enter the set of Tx CTCSS/DCS FRQ,
5
．
Set the Tx FRQ value with the keypad,
6. Press
to delete, and press
to confirm.
7. stands for the radix point, press
＃
to convert among CTCSS
、
DCS and reverse DCS.
Set contact list
：
1
．
As shown: in CH 1 , press
to enter select mode,
2. Press
/
, and contact list is shown,
3. Press
to select,
4. Select the address cable of the call to be made with
/
,
5
．
Check the alias or address code by turning the knob,
6. Key in the address code of the person you are calling,
7. Press
to transmit the current contact list.
Set status:
1
．
As shown: in CH 1 , press
to enter select mode,
2. Press
/
, and status is shown,
3. Press
to select,
4. Select the needed status with
/
,
Ch alias
CHANNEL 1
Tx CTCSS
XXXX
*
