RP6500 User’s Manual
Page 18 of 31
Zone 0 L
CHANNEL 1
Zone 0 M
CHANNEL 1
remain on that channel. Only when there are two channels added in the scan list and the scan function has been
activated, the radio can start scanning.
It can be set as:
short press: scan, long press
：
off.
1. Press the programmable key once to start scanning (it should be effective in the channel scan list).
2. Press
once to quit.
Notes: there are 8 zones from 0 (default zone) to 7; and there can be
as many as 128 channels i
n each
zone. There are totally 16 scan lists; you can select any scan list. Every scan list can
scan any channels
in different zones
(16 channels to the most).
Lone working
Press the button
set as Lone working
to start lone working. This mode is to ensure the safety of the user while
using the transceiver separately.
It can be set as: short press: personal working, long press
：
off.
1. Press the programmable key once to start personal working;
2. Press once again to quit.
Notes: the lone working is connected with the automotive checking in the programming software, and
will be effective when both are set.
Contact list
Enter the Contact list quickly:
It can be set as:
short press
: contact list, long
press
：
off.
1.
Press the programmable key once to enter the contact list
Call
2.
Press again to enter the content interface of the contact list,
3.
Select the options in the contact list with
/
4.
Press PTT to transmit
5.
Press
to quit.
Power select
Rotate the “channel selector” to enter the “power level” menu quickly. There are high, middle and low levels.
It can be set as: short
press
: power select, long
press
：
off.
1.
Press the programmable key once,
will be shown,
2.
Press it again,
will be shown,
