KNG Series Trunked Radio Programming Guide
Page 44 of 57
July 2014
4.
Use the
or
keys to display
ALL
, then use the
key to select it. The following screen is
displayed (typical screen shown).
5.
Use the
key to select
YES
. The following screen is displayed while the keys are being zeroized:
6.
When finished, the following screen is displayed to confirm that all of the keys in the target device
were zeroized. Use the
key to select
OK
.
9.11.10.2
Loading the Unique Key Encryption Key (UKEK)
UKEK
: The Unique Key Encryption Key will be used to decode KMMs from the KMF. This will allow the
TEK keysets to be sent to the radio via the OTAR process.
1.
Turn on the KVL and the target radio, then connect them using the appropriate cable.
2.
Use the
key to select
TARGET
from the Main Menu. The following screen is displayed.
3.
Use the
key to select
LOAD
. The following screen is displayed.
4.
Use the
key to select
KEY
. The following screen is displayed (typical screen shown).