25
ELIMINATING DIRTY IMPURITIES
FROM THE DRAIN HOSE
If the suction tends to be reduced and the
water level in the dust collecting tank is
correct, check the water drain hose as follows:
t %JTDPOOFDUUIFNBDIJOFGSPNUIF
power supply.
t 3FNPWFUIFQMVHPGUIFnFYJCMFIPTFGSPN
the machine.
t 3FNPWFUIFEVTUDPMMFDUJOHUBOLGSPNJUT
slot on the machine (fig. 29) and lift up
the protection cover.
t 3FNPWFUIFESQVMMJOHJU
upwards and check it is not clogged. If
the hose is clogged, clean it.
t 3DMPTFUIFDPWFSBOE
reposition the tank on the machine.
fig. 29
J
AFTER USE
Disconnect the machine from the power
source before doing the following operations.
Once finished using the machine:
t
drain the water from the dust/dirt
collecting tank and wipe the tank with a
clean dry cloth
t
store the machine in a dry place which
is not subject to sudden temperature
changes
t
clean the machine with a soft cloth and
some water; do not use any solvent or
detergent
t
store the machine on a horizontal surface
(on the floor, if possible)
t
clean the accessories with gentle soap
and warm water.
MAINTENANCE
CAUTION
ATTENTION
IMPORTANT
1-800-GO-VAPOR.com
