THERMOJET
®
H-2500E SERIES
OIL PURIFIER SYSTEM
INSTALLATION AND OPERATING MANUAL
Doc #
77740119
Rev
15
Date
June 2020
Page
49
of
100
Condensate Purifier Assembly Maintenance
Maintaining and replacing the oil absorption media in the Condensate Purifier Assembly (CPA) can be
done while the ThermoJet is operating.
Replace oil absorption media sock if saturated. This absorption media sock should remain effective for two
to four weeks. Periodic visual inspection is the only way to determine if sock is saturated.
To replace the absorption media sock locate the cover cap on the CPA housing. Remove the cap and pull
the media out of the housing.
Inspect the interior of the housing and clean as necessary. Install a new absorption media sock and re-
install the cover cap.
Locate the CPA cover
cap. Remove cap to
access the absorbent
media sock
