THERMOJET
®
H-2500E SERIES
OIL PURIFIER SYSTEM
INSTALLATION AND OPERATING MANUAL
Doc #
77740119
Rev
15
Date
June 2020
Page
45
of
100
Schedule for Routine Maintenance Checks and Tasks
Maintenance Task
Semi
Annual
Annual Maintenance Spare Parts Needed
General Inspection
X
Oil Filter Maintenance
X
p/n 19103006 Filter Element
p/n 40520235 O-ring
<R13>
Y-Strainer Maintenance
X
p/n 49002078 Gasket
Condensate Purifier Assembly
Maintenance
X
p/n 19201002 Oil Absorption Sock
Oil Mist Eliminator Maintenance
X
p/n 77750101 Filter Element
Air Breather Maintenance
X
Separation Vessel Maintenance
X
p/n 40511031 Gasket
Oil Heater Maintenance
X
p/n 40500060 Flange Gasket, 6 Inch
Auto Tune Oil Heater Controller
X
Check and Adjust Operating Pressures
X
Verify Low Oil Pressure Switch
Operation
X
Verify Oil Heater High Temperature
Cutout Operation
X
NOTICE:
Dispose of all contaminated cleaning materials in
accordance with all environmental laws, ordinances
and directives. Consult your company or plant
environmental protection department for disposal
policy. Understand the environmental effect any
used cleaning agents used and plan your cleanup
accordingly.
Use environmentally friendly products and recycle
where ever possible
WARNING
Contents in this system are under pressure
while operating.
Surfaces and contents may be HOT. Once the
system has been shut down allow sufficient time
for cooling before servicing this equipment.
