THERMOJET
®
G-3700E SERIES
OIL PURIFIER SYSTEM
INSTALLATION AND OPERATING MANUAL
Doc #
77740151
Rev
03
Date
June 2020
Page
57
of
111
Once electrical power has been removed and locked out from the unit, open the electrical
terminal enclosures for the oil heater and the high oil temperature thermocouple and disconnect
the cable connecting wires from the terminals.
Loosen the compression nut on the cable glands and slide it down the cable. Pull the cables
through the cable gland so as to remove them from the two electrical terminal enclosures.
WARNING
Use suitable transport equipment for removing the
heater bundle from the heater vessel, lifting and
re-installing the heater into the heater vessel.
Ensure that the heater is secured prior to and
during lifting and transport. Stand clear of the all
equipment while being maneuvered. Crane and
fork truck operators should be properly trained in
there operation.
Heater approximate weight is 84 Kg (185 pounds)
Oil heater terminal enclosure
High temperature cutout
thermocouple terminal enclosure
Loosen the compression
nut on the cable glands
