THERMOJET
®
G-5700E SERIES
OIL PURIFIER SYSTEM
INSTALLATION AND OPERATING MANUAL
Doc #
77740153
Rev
1
Date
June 2020
Page
29
of
90
Open the Controller Enclosure by removing the bolts that secure the cover to the box. Service
power to the ThermoJet Oil Purifier originates at the circuit breaker terminals L1,-L2 and L3
located in a controller enclosure. See the diagrams below for terminal location and user terminal
connection identification. The power connection is three phase. Voltage is as specified on the
equipment nameplate. Once all cable connections are securely connected, reinstall the enclosure
cover.
To avoid risk of explosion hazard, the Control
Enclosure cover must be securely closed with the
supplied fasteners..
WARNING
