THERMOJET
®
G-5700E SERIES
OIL PURIFIER SYSTEM
INSTALLATION AND OPERATING MANUAL
Doc #
77740153
Rev
1
Date
June 2020
Page
25
of
90
To properly vent discharge gas to the plant’s flare system, the exhaust to flare piping is
connected to the 1/2 PSIG (0.04 BAR) spring loaded pressure check valve located on the vent
connection of the ThermoJet Oil Purifier. Exhaust to flare piping must be DIN 25 (1 “ NPT) or
This machine is designed to remove
hydrocarbon and water contamination from the
processed oil.
Discharge connection must be made only to
the facility vent and flare network or to a
system specifically designed to safely manage
noxious and / or explosive gasses and
substances present in the oil being purified.
DO NOT BREATH DISCHARGE VAPORS
