background image

REL Acoustics ‘Q’ range User manual

4

IMPORTANT SAFEGUARDS

1.  Read all of these instructions.

2.  Save these instructions for future use.

3.  Unplug from the wall socket before cleaning.  Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning.

4.  Do not use near water.

5.  Do not place on a stand or table, it may fall causing injury to a child or adult, and damage to the

unit.

6.  The unit should only be operated from the power source indicated on the panel of the amplifier.

7.  Only use the power cord supplied.

8.  Do not allow anything to rest on the power cord.  Position the power cord such that it can not be

walked on.

9.  For added protection during a lightening storm, or when not in use for long periods of time,

unplug it from the wall socket.

10.  Never spill any kind of liquid on the unit.

11.  Do not attempt to service the unit yourself, as removing the amplifier may expose you to

dangerous voltages.  Refer all servicing to your dealer.

12.  Unplug the unit from the wall socket and refer servicing to your dealer under the following

conditions:

a.  When the power cord or plug is damaged.
b.  If liquid has been spilled onto the unit.
c.  If the unit does not operate properly by following the operating instructions.
d.  If the unit has been dropped and damaged.
e.  When the unit exhibits a drastic change in performance.

WARNING

This item is heavy.  To avoid risk of injury, take care when handling.

Содержание Q Series


























Отзывы: