REL Acoustics AirShip Wireless, Руководство по эксплуатации

Страница: 12 / 17

10
• If connecting RELs to Mono Bloc amplifiers, we strongly advocate using two (2) RELs, one for each
amplifier. Connect the black wire of each REL to the negative speaker terminal of the corresponding
amplifier channel; twist together the red and yellow wires of each REL separately and connect each pair to
the positive speaker terminal of the corresponding amplifier channel. In some instances, this will
result in exceptionally high gain (output) from the RELs. If it seems simply too high in gain, please remove
either the red or yellow wire from the twisted pair. This will reduce output by half and restore a natural
dynamic. If the amplifier is of balanced differential design, please follow the instructions in the section
above labeled Differential Connection.
Mono Bloc
Mono Bloc Differential