11
12
1 Volume Control for HI/LOW Level input: Use to adjust output when using either HI Level or LOW Level
input. Do not use both simultaneously.
2 Volume Control for .1/LFE Input: Use to adjust output level when using .1/LFE input from a 5.1 amplifier
or processor.
3 Crossover: Used to select crossover frequency. Variable between 30 Hz and 120 Hz.
4 Low-Level Left channel Phono Input: Used to connect low-level to the output of a preamplifier,
integrated amplifier or receiver. (For home cinema, use .1/LFE input).
5 Low-Level Right channel Phono Input: Used to connect low-level to the output of a preamplifier,
integrated amplifier or receiver. (For home cinema, use .1/LFE input).
6 .1/LFE Phono Input: Used to connect to the .1/LFE output from a 5.1 amplifier of processor.
7 Phase: Used to set phase 0-180 degrees.
8 High-Level Neutrik® Speakon® Socket: Use to connect high-level to the main front amplifier
speaker terminals.
9 Wireless enable switch: Used to turn on wireless receiver when connected to REL Longbow™
wireless transmitter.
10 Standby/ Always On Switch: Used to enable standby mode.
11 Power Pilot Light: Power On/Off indicator.
12 Power ON/OFF Switch: Use to turn unit on or off.
13 IEC Mains Socket: Fused mains (AC) input socket that accepts a detachable power cord.
14 Antenna connector: Used with REL Longbow™ wireless transmitter.
15 Pair Pilot Light: Indicates if unit has been paired with REL Longbow™ transmitter.
16 Pair Switch: Used to initiate Pair sequence with REL Longbow™ Transmitter.
REL 212/SE Rear Panel Connection Legend
8
9
10
11
12
13
1
2
3
4
5
6
7
14
15
16
REL_212/SE_Manual_01-15.indd 14-15
1/16/15 3:08 PM
