Type:
Two front-firing active woofers, rear and down-firing passive radiator
Active Drive Units:
12 in., 300mm long-throw, die cast aluminium chassis
P
assive Radiator Rear:
12 in., 300mm, die cast aluminum chassis
Passive Radiator Down:
12 in., 300mm
LF Response in Room:
21Hz at -6 dB
Input Connectors:
Hi Level Neutrik Speakon, Left and Right Lo Level phono, LFE phono,
SMA connector for wireless antenna
Gain Control Range:
80 dB
Power Output:
1000 watts (RMS)
Phase Switch:
Yes, 0 or 180 degrees
Amplifier Type:
Next Gen II Class D
Wireless capability:
Yes – REL Longbow™ transmitter [required]. Sold separately.
Protection System
Fully Electronic with SET-SAFE:
Yes
D.C. Fault:
Yes
Output Short:
Yes
Mains Input Voltage:
220-240 volts, 110-120 volts for certain markets
Fuses:
7 Amp semi delay 220 volts operation
15 Amp semi delay 120 volts operation
Dimensions (WHD):
Including feet and rear panel controls
17.2 x 32 x 20 in., (436 x 815.5 x 507 mm)
Add 1.75in (44.5mm) in depth when using Hi Level connector
Net Weight:
122 lbs. (55.3 kg)
Shipping Weight:
TBD
Finish:
Gloss Piano Black
Supplied Accessories
Mains Lead:
Yes
Neutrik Speakon Interconnect:
Yes (10 Meters Nominal)
Users Manual:
Yes
In the interest of product development, REL Acoustics Limited reserve the right to vary these specifications without notice
24
25
After initial setup, if you wish to employ the standby mode, simply move the power mode switch into the
up position to “STANDBY”.
212/SE Specifications
Model
Power Draw at Standby
Power Draw at Standby w/ wireless
Power Draw at Idle
212/SE
> 0.5 Watts
> 1 Watt
40 Watts
REL_212/SE_Manual_01-15.indd 28-29
1/16/15 3:08 PM
