Doc ID: 191-6203A
Doc Rev: 100219
Pg. 15
SET THE INSTALLED GAP
The installed gap is the separation in the clutch pack created by
adjusting the Rekluse Adjuster Assembly. This gap is what allows
the clutch to spin freely until the desired RPM is reached for
engagement. The gap must be set correctly for optimal
performance.
Do not ride your bike without adjusting the installed gap.
You will not be able to disengage the clutch until you set the
installed gap.
1. Use the long end of a hex key to turn the adjuster screw
COUNTERCLOCKWISE
until it spins freely with little effort.
2.
Gently
turn the adjuster screw
CLOCKWISE
until it stops
under moderate pressure.
You are trying to feel for the point
at which it bottoms out and starts to lift the pressure plate
(you will feel an abrupt increase in turning effort).
This
position is called your starting point.
