Rekluse RadiusX Clutch, Инструкция по установке и эксплуатации

Страница: 24 / 61

Pg. 24
Doc ID: 191-6300B
Doc Rev: 101722
5. Without using the clutch lever,
accelerate moderately to
approximately 5,000 RPM to fully
lock up the clutch and come to a
complete stop. Repeat 10 times.
Note: If the engine wants to stall or
the creep is excessive, the idle may
be too high or the installed gap may
be too small. Make necessary
adjustments before proceeding.
10 roll-on starts
6. Without using the clutch lever,
start in 2
nd
gear, then accelerate
moderately to approximately
5,000 RPM and come to a
complete stop. Repeat 10 times.
10 roll-on starts
7. Place the bike or ATV in
NEUTRAL and recheck Free
Play Gain.
8. Continue to step 4 to adjust the
installed gap until the Free Play
Gain of the clutch lever is 1/8” to
¼” (3 mm-6 mm).
Recheck Free Play
Gain and adjust the
installed gap
Note: Your clutch pack will expand with heat, so final
adjustment to Free Play Gain should be made when the bike
or ATV is warm. Remember not to ride without sufficient
Free Play Gain.
Do not perform 3
rd
gear starts with this product. Starting
in 3
rd
gear will burn up the clutch and decrease the
performance of this product in a short amount of time.