Rekluse RadiusX Clutch, Инструкция по установке и эксплуатации

Страница: 17 / 61

Doc ID: 191-6300B
Doc Rev: 101722
Pg. 17
c) While holding the top end of
the rubber band against the
handlebar, stretch the band
downward, and then loop it
through itself.
d) Pull the band through the loop,
and then attach it to the
outside end of the clutch lever.
e) While still in NEUTRAL , quickly rev the engine between
5,000-7,000 RPM (1/2 to ¾ throttle), then let it return to
idle. Notice the movement in the clutch lever when the
engine is revved. This is your Free Play Gain.
Note: It is very important the motor returns to idle before
revving the engine again or the Free Play Gain will not be
correct.
f) When the bike/ATV returns to idle, rest your hand
across the clutch lever. Rev the engine again to 5,000-
7,000 RPM so you can observe the movement while
feeling for Free Play Gain with your hand.
The Hand Method
a) Before you begin, place the bike/ATV in NEUTRAL ,
start the engine and let it warm up for 2-3 minutes to
idle down and warm up the engine oil.
b) With the bike/ATV at idle, use one finger to apply
pressure at the end of the clutch lever.