Doc ID: 191-6309001A
Doc Rev: 101619
Pg. 31
·
Always use proper gear selection for the speed and
situation whether accelerating or slowing down.
·
When accelerating from a stop start in 1st gear to
prevent excessive slipping of the clutch. Starting in too
tall a gear repeatedly will prematurely wear out the
clutch resulting in failure.
To keep your clutch performing at its best, perform regular
maintenance on your clutch.
·
Keep up with regular oil changes according to the
manufacturer’s recommendations. Clutch performance
and longevity depend on oil quality. Tired, dirty, or worn
oil may cause excessive clutch drag or noise.
·
For optimal clutch performance Rekluse recommends
using fresh, clean oil that
meets JASO-MA
oil rating
requirements. Rekluse offers Factory Formulated Oil™
developed specifically for Rekluse products. Rekluse
Factory Formulated Oil is a perfect complement to any
OEM or aftermarket wet clutch. Visit
www.rekluse.com
to
learn more.
·
Inspect all of your clutch parts for signs of wear or
excessive heat, and replace components as necessary.
This includes your basket sleeves. Clutch wear is
dependent on the riders use.
·
Measuring the friction disks for wear. This can help
determine if the components need replacing.
o
Rekluse thin friction disk minimum allowable thickness
=
0.068” (1.7 mm)
·
Replace friction disks if they measure below
specifications or if the disks are glazed and/or burnt.
SHIFTING AND OPERATION
MAINTENANCE
