Pg. 24
Doc ID: 191-6206A
Doc Rev: 062818
SET INSTALLED GAP
The “Installed Gap” is the space in the clutch pack created by the
adjustment at the throw-out rod. This gap is what allows the
clutch to spin freely until the desired RPM is reached for
engagement.
1. Reinstall the OE threaded nut onto the OE threaded throw-
out rod.
2. Turn the OE throw-out rod
counterclockwise
until you feel
firm resistance. This position is knows as the
Starting Point
.
3. Firmly turn the OE throw-out rod
1¼ turns
counterclockwise past this starting point
, then install the
OE lock nut on the clutch actuating mechanism. This
adjustment sets the “Installed Gap.”
Note:
If the lock nut will not fully index, turn the throw-out rod
counterclockwise slightly until it fully indexes between the throw-
out rod and the slot in the clutch actuating mechanism
