Doc ID: 191-6206A
Doc Rev: 062818
Pg. 13
23. Remove the drive gear, clutch assembly, and chain
simultaneously.
All three parts must be removed as one
unit.
•
Do this by grasping the drive gear and clutch assembly in
separate hands, then firmly slide them off their respective
shafts. Carefully set this assembly on a work bench.
•
If the drive gear is difficult to remove from the stator due
to the magnetism, use both hands to initially begin sliding
it off of the shaft before removing it as a unit.
24. Separate the drive gear from the clutch assembly by sliding
the chain off of each indexing gear and setting aside.
