REITEL POLYCURE, Руководство по эксплуатации

Страница: 9 / 16

9
Troubleshooting
Device doesn’t turn on.
a. Check fuses in the building.
b. Check
device’s fuse
Objects do not harden properly. a. Check whether the LEDs or the interior
are possibly dirty (see also chapter 6)
b. Possibly ventilation defective - contact
service
Ventilation does not turn off. a. If higher temperatures have been
reached during light curing, the device
cools down until a standard
temperature is reached again
b. If the ventilation doesn
‘t turn off even
after several minutes → please contact
our service hotline
Other disorders. Contact service.
Maintenance
•
Regularly check the device. Pay attention to visible damage to housing our power cord.
•
Make sure that the interior of the device remains clean. Only in this way an optimal curing
of the objects can be guaranteed.
•
Clean the housing regularly with a damp cloth.
Note
•
Clean and protect your device regularly with the REITEL stainless steel care spray
(order-no.: 90405000) to remove lime, plaster and dust as well as other contaminants
from the surface of equipment and to prevent corrosion. The spray creates a water
repellent protective film which helps keep the equipment clean.