background image

 

 

10 

  Warranty 

We, REITEL Feinwerktechnik 

GmbH, offer a 1 year’s warranty beginning from the proven 

date of purchase. This warranty covers all defects traceable to materials, design or 

workmanship. The following warranty regulations are applicable: 

Within the warranty period Reitel Feinwerktechnik GmbH or an authorized distributor agrees 

at its sole option, to perform repair or replace this product at no charge covering all defects 

traceable to materials, design or workmanship. Warranty only applies to appropriate use and 

regular maintenance of this product according to the operating instructions. Claims under 

warranty are restricted to complementary performance. Additional claims, especially claims 

for indemnifications, are not covered by this warranty. 

1. 

Warranty claims have to be addressed to the distributor the product was purchased from or  

directly to our service department. 

Contact: 

REITEL Feinwerktechnik GmbH 

Senfdamm 20 

49152 Bad Essen 

Germany 

Phone:  

+49(0)5472-9432-32 (Service Department) 

Phone:  

+49(0)5472-9432-0 (Reception) 

Fax-No: 

+49(0)5472-9432-40 

2. 

In case of warranty claim application the sales receipt or your purchase invoice showing the 

date of purchase of the product and the serial number must be furnished. Securely pack and 

ship the device, freight charges prepaid, at your own risk to us, along with a report describing 

the defect. We reserve the right to decline warranty if this information has been removed or 

modified after purchase of the product or if they are not included in case of warranty claims. 

3. 

Warranty repairs have to performed by REITEL Feinwerktechnik GmbH or by authorised 

distributors. Repairs performed by non-authorised companies will void the claim for refund 

since damages to the product resulting hereof are not covered by warranty. 

4. 

Содержание POLYCURE

















Отзывы: