Reiner jetStamp 1025, Краткая инструкция

Страница: 10 / 20

9
jetStamp 1025
1. Preparation and Taking into Operation
1.1. Commissioning
The rechargeable batteries must be charged completely before the first use.
The charging time is approx. 3 hours. The rechargeable batteries are charged when the
green charge display
14
goes out.
Only connect the device to the PC after the PCset graphic software has been installed,
otherwise the installation of the device drivers will fail!
Inserting rechargeable batteries

Fig. B
+
C +
Always replace all rechargeable batteries at once. Date, time and counter reading of the
numbering machine are retained when the rechargeable batteries are removed.
f
Open the flap for battery and print cartridge compartment
6
.
f
Push battery compartment locking
20
upwards until the locking can be opened.
f
Open battery compartment
19
, ensure correct polarity and insert batteries.
f
Close battery compartment
19
.
f
Close flap for battery and print cartridge compartment
6
.
Charge the rechargeable batteries

Fig.
B
f
Connect the power supply unit of the device to the socket for power supply unit
15
. Green
charging indicator
14
is lit. The charging process is completed as soon as the charging
indicator goes out.
Inserting printing cartridge

Fig. B + E + C
Depending on ink type used, different Protective Nozzle Seals are required.
Use sealing of the enclosed printing cartridge.
f
Switch the unit on via the ON/OFF button
3
.
The operating status LED 4 lights up green.
f
Press function key for print cartridge
5
. Print carriage
7
moves to the right into the
change position.
f
Open flap for battery and print cartridge compartment
6
.
f
Push the print cartridge locking
21
slightly upwards and open it.
f
Remove the print cartridge
8
from the packaging and remove the dust cover.
f
Place the unit on a firm surface.
f
Hold pressure cartridge locking
21
in place.
f
Insert print cartridge
8
. Make sure that it snaps into place and close the locking of the
G