ELECTRIC LAWN MOWER 1500 W
ELMR4015
Original instructions
Identifying and eliminating malfunctions
Malfunctions that occur during the operation of your lawn mower often have simple causes that you should
know and be able to repair on your own. In cases of doubt your specialised garage will be please assist you
further.
Problem
Possible cause(s)
Remedy
Engine does not start.
Connection cable not connected or
defective.
Check and plug in cable; if required
replace or have it repaired by a
specialist.
Household fuse overloaded.
Switch on fuse; if required increase
the fused house connection or
have one installed by a specialist.
Switch/plug combination defective.
Have it repaired by a specialist
company.
Motor is humming, but not running.
Lawn mower Is standing in long
grass.
Place the lawn mower onto a surface
with shorter grass.
Blade is blocked.
Stop the machine and remove plug
from the socket. Make sure that all
moving parts have come to a complete
stop. Remove blockage.
Motor suddenly stops.
Plug has become loose.
Check cable, ensure that it is attached
to the cord grip, insert plug again.
Overload protection has switched
off (depending on model).
Pull out mains plug, remove
blockage in the discharge, wait
approx. 30 min., switch on again.
Unusual noises (rattling, clanging,
knocking).
Screws, nuts, or other fasteners
loose.
Tighten parts; if the noises persist:
Contact a specialist workshop.
Strong vibrations.
Damaged blade shaft or defective
cutter.
Switch off the unit immediately.
Have defective parts replaced by a
specialist workshop.
Unclean
cut
or
speed
Is
decreasing.
Grass too high.
Set larger cutting height, if
necessary mow twice.
Grass Is not being picked up or
grass catcher is not filling
Grass too damp.
Let the lawn dry.
Ejector clogged.
Pull out mains plug, remove
blockage.
Cutters bunt.
Cutters must be replaced or
reground at a specialist garage.
Grass sack full.
Switch off mower, empty grass
catcher.
Dirty grass sack.
Switch off mower, clean air slots in
the grass catcher.
6
EN
