ELECTRIC LAWN MOWER 1500 W
ELMR4015
Original instructions
1
Contents
For your safety
1
Assembling the unit
3
Operating safety
3
Tips on lawn care
4
Transporting the appliance 5
Servicing/cleaning
5
Laying up the vehicle
5
Warranty
5
Identifying and eliminating
malfunctions
6
Information on rating plate
These details are very important
for identifying your appliance
when you order spare parts or
contact our aftersales service.
The rating plate is found near the
engine. Enter all the details on
rating plate in the following fields.
This
and
other
appliance
information can be found on the
separate CE declaration of
conformity which is a component
of these operating instruction.
Illustrations
Fold out the illustrated pages at
the start of the operating
instructions. Various models may
be described in these operating
instructions.
Graphical
representations may deviate in
detail from the purchased unit.
For your safety
Use the appliance properly
This appliance is approved solely
for use
in
accordance
with
the
descriptions
and
safety
instructions specified in this user’s
guide,
to mow the lawns of domestic and
leisure gardens.
Any other use is not as intended.
Improper use is not covered by the
warranty and the manufacturer
will reject any liability. The user is
liable for all damage caused to
third parties and their property.
Unauthorized modifications made
to the mower rule out any liability
on the part of the manufacturer for
damage resulting therefrom.
Observe the safety and
operating information
Before using the appliance for the
first time, read and follow these
operating instructions carefully.
Keep these instructions in a safe
place for future reference. Never
allow children or people unfamiliar
with these instructions to use the
machine. Local regulations can
restrict the age of the operator.
It
the
appliance
changes
ownership,
hand
over
the
operating instructions.
General safety information
In this section you will find general
information
about
safety.
Warnings that apply specifically to
individual parts of the appliance,
functions or activities are shown at
the corresponding point in this
users guide.
Before working with the
appliance
Persons using the appliance must
not be under the influence of
intoxicants,
e.g.
alcohol,
narcotics, medication, etc.
Persons younger than .16 years of
age must not use this lawn mower
—
local regulations can determine
the minimum age of the users.
This appliance is not intended for
use
by
persons
(including
children) with reduced physical,
sensory or mental capabilities, or
lack
of
experience
and
knowledge, unless they have
been
given
supervision
or
instruction concerning use of the
appliance by a person responsible
for their safety.
Children should be supervised to
ensure that they do not play with
the appliance.
For
children,
cleaning
and
maintenance of the machine is
permitted only under adult
supervision.
Before you begin work, make that
you
are
familiar
with
all
attachments
and
operating
controls as well as their functions.
Use outdoors with the permitted
and
appropriately
identified
connection cable only, e. g. B.
H07RN
—
F 3 x 1.5 mm
2
(max. 50
m).
Connecting
parts
of
connection-cables
must
be
splash-proof and made of rubber
or covered with rubber.
Before use check the supply and
extension cord for signs of
damage or aging. If the cord
becomes damaged during use,
disconnect the cord from the
supply immediately. DO NOT
TOUCH THE CORD BEFORE
DISCONNECTING
THE
SUPPLY. Do not use the machine
if the cord is damaged or worn.
Use only a connection cable
which is in perfect condition.
Before using the appliance,
—
Thoroughly inspect the area
where the machine is to be used
and remove all objects which can
be thrown by the machine.
—
check whether the grass
catcher works and the deflector
closes
correctly.
Replace
damaged, worn out or missing
parts immediately.
—
check for any wearing or
damage to the cutters, fastening
pins, and the whole cutter unit. All
worn or damaged parts must be
replaced in sets at a specialist
workshop in order to rule out
imbalances.
—
Before using, always visually
inspect to see that the blade,
blade bolt and the blade assembly
are not worn or damaged.
Replace worn or damaged
components in sets to preserve
balance. Replace damaged or
unreadable labels.
—
check whether the cable
between
the
motor
and
switch/plug
combination
is
damaged. Immediately have a
damaged cable replaced by a
specialist company.
Spare parts and accessories must
satisfy the requirements specified
by the manufacturer.
Therefore use original spare parts
and original accessories only or
spare parts and accessories
authorised by the manufacturer.
EN
