Reikel AG2216, Руководство пользователя

Страница: 10 / 71

10
Original Instructions
Angle Grinder
Introduction
This User Guide provides instructions on the correct assembly and safe use of the Angle
Grinder.
The Angle Grinder is designed for grinding metals or stones with the appropriate attachments.
All other applications are expressly ruled out.
Make sure the Angle Grinder is switched off and unplugged
from the power supply before making any adjustments.
Assembly
1. Loosen the tightening screw with the Hex
2. Push the guard in place and turn, so that it is
facing the rear of the Angle Grinder.
3. Firmly re-tighten the screws.
Note: Check that the screw and nut are
Fitting the Guard
The Angle Grinder is supplied with grinding guards. Please take time to refer to the diagrams
in this manual to ensure you are using the correct guard for the task. Failure to use the right guard
for operations could result in injury.