background image

Variants & Options

27

PORTA

BASE

The list below outlines additional variants and 
options available;

    

Height Adjustable Feet

Height Adjustable Feet 

Height adjustable feet can be fitted to the 
PORTABASE Counterbalance weight basket. This 
provides additional fine height adjustment [up 
to 9”].

Each foot may be adjusted independently, 
providing a method of levelling the system on 
uneven ground.

    

Attach the Height Adjustable Feet to the 
basket and secure with the bolts provided as 
shown in figure 1. 

If the weight basket’s height adjustable feet are 
fitted the following points must be observed:

    

When maneuvering the weight basket, always 
have the height adjustment legs fully retracted 
as shown in figure 2.

    

Position the system in place for the lift before 
setting the height

    

Manually raise each leg in turn and set the 
height by rotating the handle in a clockwise 
motion.

    

Having set the adjustment of all four legs on 
the basket, ensure that the system is level prior 
to use.

Inspection & Maintenance

The legs and brackets should be subjected to 
periodic inspections by a competent person in 
line with products inspection and maintenance 
guidelines. 

The height adjustable feet should be lubricated 
with EP2 grease on the thread at regular intervals 
[up to a 6 months maximum], depending on 
service conditions.

Height Adjustbale Feet in parked position

Operate the Height Adjustable Feet to the required height

Fig 2

Fig 3

Fig 1

Variants &  

Options

.

Содержание PORTA-BASE






















Отзывы: