PAGE 3
1.5 Warranty and Liability
Warranty or liability claims shall be applicable according to the general terms and conditions of Reichhardt
GmbH Steuerungstechnik. You can find the general terms and conditions at www.reichhardt.com.
Reichhardt will not assume any liability for damages resulting from an improper use.
Use of not approved Accessories and Spare Parts
Only accessories and spare parts approved by Reichhardt may be used for GREEN FIT. These are specifi
-
cally designed for GREEN FIT and meet high standards in terms of safety and reliability.
Reichhardt expressly points out that accessories and spare parts not approved by Reichhardt must not be used
with Reichhardt systems. Otherwise, the safety and operational readiness of the system might be impaired.
Furthermore, malfunctions of the system may lead to personal injury or property damage.
Reichhardt will not assume any liability for the use of not approved accessories or spare parts.
Unauthorized Modifications of GREEN FIT
Any changes to the system which have not expressly been authorized by Reichhardt shall void all warranty
claims as well as any liability of Reichhardt for possible malfunctions of the system. Additionally, the EU Dec-
laration of Conformity (CE marking) or other regulatory approvals might become ineffective. This also applies
for removal of factory-applied seals or sealing paint.
1.6 Service and Repair
If you have any questions concerning GREEN FIT as well as the ordering of system supplements or spare parts,
please contact your dealer or the manufacturer.
Always notify the dealer or Reichhardt immediately in case of damage to the product.
1.7 Cleaning and Storage
Never use a high pressure cleaner to clean the components. Use only a moist cloth for cleaning purposes.
To extend the service life, you should ensure over the winter, or if the components are not installed on a ve-
hicle, that all parts of the system are stowed and stored together with all screws and required accessories.
Avoid moisture and wet conditions as well as places with high temperatures next to ventilation systems, ra-
diators, engines and devices that generate heat.
Avoid storing the components next to windows or skylights through which heat is generated by solar radiation.
1.8 Disassembly and Disposal
The system should be dismantled by qualified personnel (e.g. dealers or Reichhardt service personnel).
To avoid environmental damage during disassembly and disposal, the following points must be observed:
• GREEN FIT components must be disassembled and sorted according to material characteristics.
• Obtain information on how to dispose of the single components from your relevant municipality or waste
management facility. Some of the components shall be subjected to a special waste treatment.
• Dispose of all components according to applicable regulations.