PAGE 16
On the second page, you can make the settings de-
scribed in the following (see Fig. 17).
• VT use of: Selection of the CAN bus (CAN bus 1,
CAN bus 2). A selection between several CAN
busses is only possible if the messages are re-
ceived on CAN bus 2 and if this is permitted by
the vehicle code.
• Change VT: Press the select button to select the
terminal on which GREEN FIT shall be loaded
(active VT) from several available VTs.
By repeatedly tapping the “Next” button, the dif-
ferent selection options (active and available VT)
can be displayed (see Fig. 18). Save the desired
option by keeping the OK button pressed for se-
veral seconds. The application is automatically
closed and loaded to the selected terminal.
• Time to wait for selected VT: The interval the
GREEN FIT application waits until it selects an-
other terminal if the selected one is not available.
Fig. 17:
Terminal configuration – page 2
Fig. 18:
Select VT