17
TROUBLE SHOOTING
Problem
Cause
Solution
Backlighting is on, but no LCD display
No power to BATTERY wire or blown 10A
main fuse.
Check for both ACC & BATTERY voltage
with Multi-meter, check all fuses.
Cannot tune radio stations
The antenna cable is not connected. The signal
is too weak. The radio is in the wrong
frequency steps.
Connect the antenna cable. Check the
frequency spacing in the radio’s SERVICE
menu.
USB media not playing, or says loading.
Media is the wrong file type.
Convert files to a usable format, see file
requirements section of the manual.
Audio is distorted or low.
Source audio level is too weak or overdriven.
Bitrate of audio file is too large.
Adjust the volume level of the auxiliary
source. Change the sample frequency or
Bitrate of the file.
iPod
®
screen displays “loading” for a
long period of time.
Device is not a supported device. The radio
supports a majority of iPod® models, but not all
are guaranteed.
Wait for iPod® to load or reconnect 30-pin
plug. If still loading, then device is not
supported, or has low battery. Use the
AUX input or a Bluetooth® connection
instead.
The Radio does NOT respond to the front
buttons
An error in operation has occurred
Reset the unit from the front panel.
The Radio does not charge my device
The device requires additional current via the
USB to charge the device
Unplug and try again. The USB cannot
support more than 5V/500mA.
