18
Fitting the control box and radio receiver
a. Fix the control box (D) and radio receiver (E) at a suitable location.
Depending on the cabinet design the control box should preferably
be fixed to the middle wall or rear wall in the bottom carcass area.
Use suitable wood screws (not included in the scope of supply) for
the board thickness to fix it in place. Please see the following
assembly step „Making the electrical connections“ in the
assembly diagram below. Use only the designated fixing points for
assembly.
Note!
The position of the control box and the receiver is to be selected in such
a way that damage to the unit as well as electrical cables (motor cable/
power cable) due to moving parts, such as drawers or pull-outs,
is avoided.
Always ensure that power cables are kept out of passageways.
RAUWORKS Front,
Controlbox CBD6 Fa.Linak
Geometrie aus REHAU-Zeichnung
PKS-16078 B vom 08.11.2012 ,
für Einbauanleitung.
M1:2
08.11.12 Fa. REHAU AG+Co,
Konstruktion CCT-IS,
Kiessling 2424
Making the electrical connections
Connect the electrical components as shown in the diagram:
a. Connect the cable for the lifting column (B) to the motor cable (G).
Connect the motor cable (G) to the control box (D). Use positions 1
and 2 on the control box (D) to do this.
b. Connect the radio receiver with the cable (E) onto the control box (D).
Use position A1 on the control box (D) to do this.
c. Insert power cable (F) into the control box (D). Use position AC on
the control box to do this.
Power cable (F)
Control box (D)
Motor cable (G)
lifting column 2
Motor cable (G)
lifting column 1
Radio receiver
with cable (E)
Illustration: Making the electrical connection
B41604_RAUWORKS_front_elektr_Montageanleitung_DE_EN_FR3_eps.indd 18
4/26/2013 5:15:04 PM
