www.vintage-mobility.ch
27
SEAT ROTATION ADJUSTMENT
The seat rotation lever will secure the seat into several positions.
1. Push forward on the seat rotation lever to disengage the seat
2. Rotate the seat to the desired position.
3. Release the lever to secure the seat into place.
Figure 14: Seat rotation and front-to-back adjustment levers
FRONT-TO-BACK SEAT ADJUSTMENT
(Figure 14)
You can reposition the seat forward or rearward to adjust the distance between the
seat and the tiller:
1. Move the seat sliding lever located at the lower left side of the seat outward
2. While holding the lever out, slide the seat forward or rearward.
3. Release the seat sliding lever once the seat is in the desired position.
SEAT HEIGHT ADJUSTMENT
(Figure 15)
The
GATSBY
seat can be adjusted to different heights. To reposition the scooter seat height
seat proceed as follows:
1. Remove the seat and the shroud above the batteries.(see also Appendix A2)
2. Remove the seat height adjustment bolt.
3. Raise or lower the upper seat post to the desired seat height.
4. While holding the upper seat post at that height, match up the locating holes in the upper
seat post with those of the lower seat post.
5. Insert the seat height adjustment bolt through the locating holes of both the upper and
lower seat posts.
6. Reinstall the nut onto the seat height adjustment bolt and tighten.
Seat rotation
lever
Seat sliding
lever
