REHASHOP KREHA-2080, Инструкция по эксплуатации

Страница: 7 / 23

7
at ch
A L L E S W E E R Z O G O E D A L S V R O E G E R
verpleeg- nl
1.3 Pivoting the leg supports: Press the
lever on the leg supports towards the seat
and then pivot them outwards.
To reposition the leg supports in front of
the wheelchair, press the lever once more
and move the footrests back into their
original position.
Lightweight Wheelchair: Instruction Manual
Article No.: KREHA-2080-45
Assembly and Adjustment
1.1 Adjusting the angle of the footrests:
Use the 6mm hex key to loosen the screws
on the side of the footrests. Now you
can adjust the angle between the footrests
and the floor, and then retighten the fixing
screws.
1.2 Adjusting the height of the footrests:
Unscrew the knobs on the rear of the
tubes by hand and remove the bolts from
the front. Now you can adjust the height of
the footrest to fit the size and leg-length of
the user. Once the foot supports are at the
right height, insert the bolts into the
pre-drilled holes and retighten the knob.
The angle of the footrests can only be
adjusted when they are at least 5cm from
the floor.
Attention
Please always check before moving
off that the footrests are correctly
locked into place.
Attention
Foreword
Dear Customer!
Thank you for purchasing a wheelchair
from REHASHOP. The carefully designed
REHASHOP wheelchair is light, comfortable
and efficient. It is flexible and safe to use,
and enjoys great popularity among the
majority of its users. Before use, please
read these instructions in order to better
understand the functions of the wheelchair
and therefore better control it. You should
carry out maintenance and servicing as
necessary to ensure the wheelchair is in
good condition. For any questions, please
contact the dealer or the manufacturer and
we will be happy to help!
GB