Rehan i-Reader, Руководство пользователя

Страница: 6 / 16

3
6. Controls
The i-Reader can be optionally used with a monitor, keyboard and mouse, which
will provide you with extra options. When you connect a monitor to the i-Reader,
the camera feed will be visible on the monitor. Scanned documents will then be
shown on the monitor and a highlighting box will indicate which word is spoken.
It is also possible to connect a keyboard and a mouse to the i-Reader. This will provide
the user with an array of extra functions. See chapter 6.5 for further information.
6.1 Starting up the i-Reader
Switch on the power supply to the i-Reader by pressing
the on/off switch on the right hand side of the device.
Switch the i-Reader on by keeping the green on/off
button on the front of the device pressed for 2 seconds.
During the startup process, as well as during shutting it
down, you will hear a ticking sound.
The startup process will take about 60 seconds and is finished when you hear
“Camera started” followed by the version number of the software. An i-
will also inform you of the remaining battery level.
The controls can be found on the control panel on the front of the device.
6.2 Controls Live mode
When starting up the i-Reader, you’ll be placed in the Live mode. In the Live mode,
the controls have the following functions:
Play/pause
Scan the page and start
reading.
Volume
Set volume.
Reading speed
Set reading speed.