User manual of Tilty
page 27 of 43
the vertical as well as in the horizontal position. For this, use the different slots on the
back tube – just loosen the respective screws, get them in the needed position and
re-tighten them.
If the chair is equipped with foldable lateral truss pads, for opening you will have to
pull up the truss pads in their rotary joint in a perpendicular line so far until they may
be easily rotated. Then turn them by 180° and make them snap back. For locking
them, proceed in the analogous way.
9.7 Headrests (as option)
Our headrests may be adjusted in height, in depth and in angle. For this, loosen the
clamping levers of the connection you want to adjust by turning them slightly. Then
re-tighten them after you have reached the needed position. The headrest’s angle
may be adjusted by slightly loosening the screwed connection and tightening them
as you have reached the needed position.
