User manual of Tilty
page 13 of 43
punch plate. Keep the hook pulled out and get the seatback into position. Then
let go the string’s hook and make sure that the attaching bolts are really firmly
engaged into the notch joint.
•
Now fold back the leg support.
•
If Tilty is equipped with height-adjustable leg support/s, first of all swing them
downwards (notch joint). For this, pull the bolt out of the notch joint, get the leg
support/s in the perpendicular position and re-lock them. Make sure that the
screws on the seat’s underside are tightened properly, so nobody will be injured.
•
If your Tilty is equipped with a fixed seatback, it will be assembled in the end. For
this, slide downwards the seatback along the back tubes with open attaching
bolts. Then close the bolts by simply turning them until they snap into the
securing device.
•
If necessary, fold outwards the lateral truss pads and push backwards the
headrest.
•
Now you/ your child may take your seat. But please take care that you, or your
child, will not put weight on the foot rest/s, nor on the brake lever or brake lever
lengthening.
•
As an option, Tilty will be equipped with extendable sliding handles which you
can get into the correct position simply by loosening the clamping levers.
Afterwards, re-tighten the clamping levers.
•
An extendable sliding clamp will be adjusted in height in exactly the same way.
Then loosen the star grips and adjust the sliding clamp’s angle according to
your needs - fix this position by re-tightening the star screws. Don’t worry, our star
grips are made of tempered steel! So it will be quite impossible for you to plane
down the star grip’s cogs.
•
The one-handed sliding handle will be adjusted just like the other sliding handles.
