RehabMedic Magneto Pro 100, Руководство пользователя

Страница: 46 / 64

44 Rev.02.17 del 27.10.2017
HOW TO STOP THE PROGRAM
To stop the program hold the OK button down until a beep is heard.
HOW TO CHANGE THE TREATMENT TIME
To change the treatment time, press the * button so as to highlight the area and act with the Up
and Down keys to change the hours and minutes. It is possible to set until a maximum of 9 hours
and 59 minutes.
After setting the time wait a few seconds until the area is cleared.
INCREASING AND DECREASING THE PRESET POWER
If you want to increase or decrease the preset power (field), use the UP/DOWN power buttons.
“LAST 10” MENU
MagnetoPRO 100 keeps track of the last ten executed programs. In this way, they are available
for a very simple and fast execution.
The recording takes place automatically at the end of the execution of a program. If the memory
is full, the older program is automatically deleted.
When you turn the device on, select “Last 10” and confirm with OK.
With the P+ and P- keys of the Joypad, select the program you want to make (if there is no pro-
gram in this menu you will read “EMPTY”).
After confirming the selection two entries will appear:
a – Start
b – Delete from the list
By placing the cursor on “Start” and pressing OK you can launch the selected program. By pres-
sing “Delete from the list”, the program will be deleted from the “Last 10” list.
UP/DOWN BUTTONS ON THE RIGHT:
- Change of the minutes
UP/DOWN BUTTONS ON THE LEFT:
- Change of the hours
UP/DOWN BUTTONS ON THE RIGHT:
- Change of gauss tens
UP/DOWN BUTTONS ON THE LEFT:
- Change of gauss units