Rehab Balance, Руководство пользователя

Страница: 14 / 26

14
HD Balance | Manual
3.12 Leg rest
ANGLE ADJUSTABLE LEG RESTS
Angle adjustable leg rests are standard on HD Balance. They can
be angled between 90° (straight down) and 180° (straight out)
with 10° steps (10 positions).
Components see Diagram 24:
1 Locking lever for removal of leg rests
2 Angle control, release button
3 Leg rest tube
4 Cap, outside
5 Padding, inside
6 Knee joint
7 Turnable link
8 Snap lock, footrest
ANGLING OF LEG RESTS
- Grip the leg rest tube as far down as possible (1 in Diagram 25). Lift
slightly to ease the load on the locking mechanism.
- Push button on the outside of the knee joint (2 in Diagram 25) and
move the leg rest to the desired position (3 in Diagram 25).
- Release the button and move the leg rest in either direction so that
leg angle mechanism snaps into the locked position.
TURNING OUT LEG RESTS
The leg rests can be angled out by about 90 degrees for better
access in and out of the chair. In order to angle them out, grip the
knee joint from above and push in the locking lever
(1 in Diagram
26), then turn the leg rest (2 in Diagram 26)
.
REMOVAL OF LEG RESTS
- Grip the knee joint from above and press in the locking lever (1 in
diagram 27).
- Lift straight up until the leg rest is loose (2 in diagram 27).
- The leg rest can then be lifted out without the user’s legs needing to
be stretched (3 in diagram 27).
Alternatively, the leg rest can first be turned out and then lifted off.
MOUNTING LEGRESTS
- Grip around the knee joint press in the locking lever (1 in diagram 28).
- Move the knee joint just above the bracket on the wheelchair.
- Align the hole with the peg on the seat frame and slide it down (2 in
diagram 28).
- Turn the knee joint so that it points straight ahead and ensure that
the locking pin clicks in.
Diagram 24.
2
1
3
8
4
5
6
7
Diagram 25. Angling of legrest.
1
2
3
Diagram 26. Turning out legrest.
1
2
Diagram 27.
Removal of legrest.
1
2
3
Diagram 28.
Mounting legrest.
1
2